How to clean the sub-cigarettes in three minutes?

  Glass water pipes are generally composed of three parts: a glass pipes filled with nicotine solution, an evaporation device and a battery. The atomizer is powered by a battery stick, which can convert the liquid nicotine in the smoke bomb into smoke, so that the user feels like smoking when smoking, so as to achieve “swallowing clouds and spitting fog.” It can even add chocolate, mint and other flavors to the pipe according to personal preference. However, the nozzles of glass water pipes need to be cleaned after a period of use, otherwise the taste will become sweeter and the fogging effect will be worse. So how should it be cleaned? Let’s take a look at the method.

  Glass water pipes spray water pipe cleaning method

  1. Hold a small bowl of warm water; in addition, use another bowl to hold a small amount of wine/vinegar/cola (gasoline is best to wash the oil, but considering that the spray pipe of the glass water pipes is directly into the mouth, gasoline is not recommended); according to the spray pipe The structure of glass water pipes (here, take the author’s ultra-sensitive sprinkler glass water pipes as an example), disconnect the battery stick and put it aside. Disassemble the cigarette holder, atomization chamber, atomization core, flue pipe, atomization core seat, etc. Soak in warm water for about 10 minutes, then take it out completely, wipe off the moisture in each part with a towel, and replace it with water.

  2. Clean the cigarette holder, atomization chamber, smoke duct, and atomizer base: take the parts out of the warm water, clamp a cotton ball with tweezers, dip the cleaning fluid, and wipe back on the surface of the parts until there are traces. The cleaning agent on the components and the smoke smell on the cigarette holder disappear completely. Rinse the remaining cleaning fluid with water and wipe it clean. Be careful not to use too much force to prevent cotton from remaining in the threads, thereby preventing the nozzle assembly from loosening.

  3. Clean the water pipes atomization core: use tweezers to clamp the oil guide rope on the atomization core (there is no need if there is no oil guide rope), slowly pull out the oil guide rope; clamp the cotton cloth with tweezers and immerse it in the cleaning solution, Go deep into the atomizing core and heating wire, and scrub carefully until the surface traces disappear and there is no smoke oil or peculiar smell, then rinse it off and dry it with clean water. Then use cotton to make the oil guide rope, and use tweezers to clamp the oil guide rope in the heating wire.

  4. If there is an oil guide rope, the snail veil needs to be cleaned and replaced every half month. When changing to a new flavor of e-liquid, the appearance of the snail needs to be cleaned and replaced. If there is no screw eye with an oil guide rope, clean the screw eye only once a month.

  5. After all parts are clean and dry, assemble all parts. Turn on the power, dry-burned snails meet within one second, disperse all the water vapor in the parts, and then add snail oil fume. Too much water vapor on one side will affect the taste.

  How to deal with the drop of atomization effect

  1. Wash with water and warm water. Pour excess warm water into the snail lookah atomizer, gently swing for 1-2 minutes, then pour out the water and blow dry with a hair dryer. This method is more complicated, but still retains the taste of snail oil.

  2. Vinegar, put the atomizer in clear water mixed with vinegar, and then stop cooking. After about ten minutes, rinse with water and blow dry. It is a good choice to clean the glass water pipes atomizer with vinegar, and the effect is good. 3. Coke: Soak the seahorse lookahtip atomizer in a glass of Coke for 24 hours. After completion, take it out, wash with warm, cold, and boiling water, and blow dry first. This method is very complicated and the effect is not ideal. The smoke oil smell was very strong before.

  4. Vodka, dry the atomizer, pour the excess vodka, seal the mouth of the atomizer with your fingers, shake it gently for a minute or two, then pour it out. Then rinse with hot water and let dry. Remember, there is no need to blow dry, the vodka smell needs to disappear. This is a simple method, but it is also a relatively inefficient method. It can basically eliminate the dirt and smell on the inner wall of the glass tobacco pipeslookah nozzle atomizer.

  5. Inclined method: spread the paper towel on the table top, and place the atomizer obliquely down for 24 hours. The smoke in the hippocampus nozzle will gradually leak out. Then rinse with warm water and blow dry with a hair dryer. This is also considered a relatively ineffective method. Of course, if you think the above methods of cleaning glass spoon pipes are complicated, the most partial method is to indirectly replace the atomizer, which saves time and effort.

Product Enquiry

Hello, thank you for visiting our store, please fill in the following information to purchase!
Thank you for your information, we will contact you as soon as possible, please wait!